5 Frames with an IR Converted Lumix ZS3/TZ7 in Iceland – By Dave Powell

I love digital infrared. Until this year, my best IR camera was a 3.4-megapixel Nikon Coolpix 990 that a good friend converted for me. The “antiquarian” color scheme in which its CCD sensor sees infrared wavelengths is so lovely that I rarely convert the camera’s files to monochrome.

But the camera isn’t exactly compact when worn around one’s neck for hours. I’ve long wanted a higher-resolution–but smaller–IR shooter. But sadly, after the 3-megapixel era, digital cameras really had to be converted if one wanted to shoot tripod-free, hand-held, IR. And this conversion was either expensive when done by someone else, complicated to do oneself, or both. I often trolled YouTube for videos about conversions that I might be able to handle, and this year, I finally found these excellent vids about converting Panasonic’s Lumix DSC-ZS3 (called the TZ7 outside the US):

• Part 1: Removing the ZS3/TZ7 IR hot-mirror
• Part 2: Attaching an IR bandpass filter

In Part 1, you remove the camera back, remove the “hot-mirror” glass that stops IR rays from reaching the sensor, and then put the camera back together. Part 2 shows how to attach an IR “bandpass” filter to the camera lens. This filter looks like black glass because it blocks visible light and lets only IR rays reach the sensor.

These kinds of conversions usually require a number of steps– including the sometimes tedious removal of many tiny screws. But the ZS3 procedure required few steps, and the removal of only nine screws. I could handle that!

So I grabbed an inexpensive ZS3 online, and in less than 30 minutes, performed the operation and attached a 37mm Tiffen #87 IR filter. (IMPORTANT: Use the kind of sturdy Phillips screwdriver that’s described in Part 1. If you try one of the skinny drivers that come in hardware store sets, you may not have enough torque to break the “thread lock” that camera manufacturers sometimes use. And you could easily strip the tiny screw heads.)

I did deviate from Part 2’s method for attaching the filter to the lens. Instead of using epoxy glue, I preferred something almost as strong and much more controllable and reversible: the thick, two-sided mounting tape that’s sold in most craft-supply stores. It’s:
• Easily cut into any desired shape (glue is much harder to control),
• Flexible for precise positioning,
• Strongly adhesive,
• And easily removed if desired.

I cut and bent a skinny strip of the tape into a sticky ring between the lens and filter. You can see this white ring behind the filter here:

I also used adhesive-backed felt to fabricate a friction-fit Kodak Series VI lens hood:

Lumix ZS3 camera with lens hood

When a circular white ring appeared in my first test images, I correctly assumed that IR rays were reflecting onto the lens from the tape ring’s inside edge. Blackening it with a permanent marker fixed the problem.

Then, the camera joined my wife and me on a circumnavigation of Iceland on a 189-passenger arctic expedition ship. During the adventure, my tape-ring hack remained strong, and the DIY lens hood prevented direct sunlight from hitting the filter and reducing image contrast.

And while the ZS3 lacks manual exposure controls, there are effective workarounds. To maximize image quality, I:

• Selected the camera’s lowest ISO (80),
• Set a minimum allowable shutter speed of 1/30 sec,
• Selected the camera’s strongest image-stabilization setting (Mode 2),
• Shot in monochrome as opposed to color,
• And selected the camera’s “Sports” Scene Mode.

Some of these settings might seem counter-intuitive for shooting through a dense IR filter. But they worked. The low ISO reduced digital noise to a pleasant film-like grain. The minimum allowable shutter speed kept the camera from falling down into hand-held hell. Maximum image stability was necessary since a tripod was impractical on this trip. I shot monochrome to save me from having to convert the camera’s garish pink IR JPEGs. And the Sports Scene Mode forced faster shutter speeds to reduce subject blur. This further strengthened the camera’s already effective optical image stability.

The following photo was a Hail-Mary shot that I grabbed near Reykjavik city hall:

Bicycle riders Reykjavik Iceland

While we waited for our bus, some of the city’s ever-present bicycles whizzed past. Without thinking, I quickly raised the ZS3 and shot. The camera admirably froze the bicycles’ motion with an automatically selected aperture of f/3.3 and shutter speed of 1/100 second. This relatively fast shutter surprised me, since I was shooting at low ISO through very opaque glass. But I was now confident that careful hand-held shots would be even sharper.

Next is one of Iceland’s most fascinating locations (taken at f/4.2, 1/100 second):

Thingvellir Iceland

Part of Iceland’s “Golden Circle,” this UNESCO World Heritage site is Thingvellir National Park. It’s said to be the location of the “world’s first parliament,” where– around the year 930– Icelandic settlers began meeting to talk with words rather than knives, swords and axes.

This is also one of the few places on earth where the mid-Atlantic volcanic rift runs up onto dry land (and nearly cuts Iceland in half). According to our guides, the tall cliff at the right is on the “North American” tectonic plate and the “Eurasian” plate is a long way off to the left of this view. This rift valley grows about one inch wider each year… and is around 5 inches wider today than when we were last here in 2017. Iceland is reportedly the only place where one can literally walk back and forth between the North American and Eurasian plates.

The “Land of Fire and Ice” is deservedly famous for its volcanoes and glaciers. But thousands of its volcanic features aren’t volcanoes at all. For example, consider these large “pseudocraters” beside a parking lot (captured at f/3.8, 1/100 second):

While truly volcanic in origin, they don’t have underground magma chambers. They actually formed around 2,300 years ago, when molten lava flowed over wet boggy ground. The resulting steam explosions created large lava bubbles… some of which burst open and cooled into craters like these. But other bubbles didn’t burst, and formed hollow domes in which resourceful Icelanders sometimes house farm equipment, supplies and animals. (I wouldn’t be surprised if some folks even live in them… Icelanders are quite creative!)

NOTE: Infrared can strongly differentiate rocks and plants. The brighter sides and interiors of the craters are actually grass, while the dark rims are lava.

I shot the next photo in Iceland’s Námafjall (“Devil’s Kitchen”) geothermal area (exposed at f/4, 1/200 second):

Námafjall fumarole Iceland

The country has many fumaroles like these, where hot volcanic gases vent into the atmosphere. They can be both smaller and bigger than this one. TIP: Don’t stand downwind!

And finally, one of the country’s largest waterfalls is Godafoss (captured here at f/4, 1/125 second):

Godafoss waterfall Iceland

It’s easy to see why Icelanders call it their “Niagara.”

Though I also shot many visible-light photos with an equally small Lumix ZS-100 camera, digital infrared seems especially appropriate for Iceland’s stark beauty. If these few examples inspire you to IR-convert your own ZS3/TZ7, I don’t think you’ll be disappointed. Whether photographed with film or digital cameras, and in visible light, infrared, or both, Iceland is scenic. And if you haven’t yet visited the island and its friendly people… GO!

FINAL NOTE: Other than occasional cropping, my only post-processing was to spread image histograms across the full range of grayscale tones using Levels black- and white-point sliders.

—Dave Powell is a Westford, Mass. writer and avid amateur photographer.

Contribute to 35mmc for an Ad-Free Experience

There are two ways to experience 35mmc without the adverts:

Paid Subscription – £2.99 per month and you’ll never see an advert again! (Free 3-day trial)
Subscribe here

Content contributor – become a part of the world’s biggest film and alternative photography community blog. All our Contributors have an ad-free experience for life.
Sign up here.

Leave a Comment